Some basic information about the gel-coat
We generally recommend that you keep your hull with a gel-coat surface in its original condition
for as long as possible, and maintain it using cleaning products, polishes and sand polishes.
There is no better surface than the gel-coat for maintenance and repair work.
With a white gel-coat in particular, the outer shell can nearly always be brought back to
an excellent condition using different sanding and polishing techniques. With coloured hulls,
this gets more difficult as the boat ages. Here, repairing a scratch even with the original
gel-coat is highly problematic, since the new gel-coat never has the same colour as the old,
bleached gel-coat. Dark or coloured gel-coat also chalks much more rapidly than light or white
Before you have your yacht lacquered, always check first
whether the old gel-coat can be restored using special polishing techniques. We specialise in this
field, and will be happy to make you an offer.
If polishing no longer helps, the last option is to lacquer the yacht to get back that beautiful
appearance. Here, the gel-coat must be well sanded, damage must be repaired, and all foreign
substances which may affect the silicon or colour structure must be removed. We prime the outer
shell at least twice for a perfect yacht lacquering result, with an interim sanding operation and,
when necessary, levelling out cracks.
Yacht ready for lacquering
Only when the prime coat onto which the lacquer is to be sprayed is in perfect condition after
being sanded do we start with the final lacquer, using a spraying technique. In practise, this means
that the surface to be lacquered is primed, sanded and then checked for damage. If we
do find damaged areas, these are levelled out and sanded, before the entire surface is primed
again. We repeat this procedure as many times as is necessary.
Our workshop is equipped for lacquering boats with a suction unit and a heating facility
with a length of up to 11 meters.
For the primer, we use epoxy primer, with epoxy filler for rough levelling out work. The final
lacquer is then completed using either International Perfektion 709, or using the high quality
AWLGRIP yacht lacquer. The AWLGRIP yacht lacquer is extremely tough, and can withstand bleaching
for significantly longer. The AWLGRIP lacquer also matches the properties of the gel-coat most
closely, which means that repairs can be completed with a better result later on.
We will be happy to make you an offer regarding the lacquering of your yacht.